With the largest range and configuration options in the UK, here's a quick look at some of our Motofog Dust Control & Suppression and MB Dustcontrol B.V. products in action. If you already own one of these systems make sure you protect it this winter by disconnecting water hoses and opening all drain valves to avoid frost damage.
You can Rent or Buy, plus we always have a quality range of used systems on our website.
Always disconnect the hose and follow instructions for each model, as follows:
Motofog Dust Suppression units
MFJ10
• Raise the Spray Arm
• Open the orange knob on the drain valve to let any water drain
• Unscrew the filter cup to avoid water remaining in the cup & freezing.
MF20, MF40D
• Set the nozzle selector knob to the central point.
• Open the orange knob on the drain valve.
• Turn the ignition key 1 click. The water will be ejected from the system.
• Remember to turn the ignition key off and the nozzle selector knob back to chosen jet.
MFX20
• With the hose pipe disconnected turn the MFX20 on to expel any water in the system.
MF60D
• Open the orange drain Valve.
• Turn ignition to the ‘ON’ position for 8 seconds to expel and water from the system. Repeat to ensure all water expelled.
MB Spray Cannons
On all models:
• Disconnect hose pipe or drain the water tank.
• Open the water pump drain valve.
• Open the nozzle ring valve to allow water to drain out
Contact our team on: 01962 760055